Pneumatic Solenoid Valves
- Industrial Automation Solenoid Valve Replacement
- Solenoid Valve with various connection
- Compact dimension fit confined space
- Air and inert gas work media
- N Series for use of single or multiple valves
10MM Solenoid Valve for Various Industries Purpose
At Heightronics, we provide 10mm solenoid valves with no minimum order quantity, 24/7 service support and maximum output for factories.
With a yearly capacity of millions of pieces, our valves have been highly valued in more than 10 countries, offering perfect performance and reliability.
Contact us today, Maximize your manufacturing outputs with our superior solenoid valves!
- Stable Quality – Quality endorsement from our customers in over 10 countries
- Sufficient Stock – over 100 modes of valves for different industries
- Long-term warranty – life long service and support
10mm Direct Acting Solenoid Valve N Series
371 series direct-acting miniature solenoid valves can be installed on solenoid valve manifold in combined use way or used directly with a single valve seat for separate installation. Can be used as a pilot valve for high-flow valves as well as high-frequency control of single-acting cylinder operation
Small solenoid valve 1.3wh available in NO or NC mode. Pin socket or encapsulated cable type for connection. DC6V, DC12V. DC24V (more voltages available on request)
3/2, 2/2 mode; NC, NO type; DC12V, DC24V, AC110V, AC220V or more;more efficiency and less heat emission, support 100% continuous operation.response time in milliseconds(<6~8ms)
3/2, 2/2 mode; NC, NO type; DC12V, DC24V, AC110V, AC220V or more;0.75w, 1w power consumption; cut-off type; wire, pin socket connector; on/off response time <8~10ms
2/2 mode; NC, NO type; DC6V, DC12V, DC24V, AC110V, AC220V or more;0.3w, 0.75w, 1w; wire, pin socket connector; more convenient installation ; response time <8~10ms
2/2, 3/2 mode; NC type; DC6V, DC12V, DC24V, AC110V, AC220V;0.3w, 0.75w, 1w; wire or DIN socket connector; workable under -100kpa ; response time in milliseconds(8~10ms); scientific,automation applications
2/2,3/2 mode; NC type; DC6V, DC12V, DC24V; 0.75w; wire or DIN socket connector; workable under -100kpa ; blink response time in milliseconds; applied in textile, automation or where very compact working space required
2/2,3/2 mode; NC type; DC6V, DC12V, DC24V,AC110V,AC220V;0.3W,0.5W, 0.75w,1W; wire or PIN socket connector; workable under -100kpa ; IP50, IP65 protection; perfect 10mm solenoid valve replacement use
N371 Series Solenoid Air Valve (width 10mm）
Direct acting 100m solenoid valve replacement High Frequency for high speed industry operation
NO or NC options | Moderate Price | Sufficient in Stock
N371-C4ZPN371-C4ZP 10mm 3/2 NC
10mm Solenoid Valve
Valve position: 2-position 2-way, normally closed (NC)
Work Media: air or inert gases
Mount: 90° Socket Connection
Voltage:24v
Power:1.3W
N371-C4SPN371-C4SP 10mm 3/2 NC
Solenoid Valve
Valve position: 2-position 3-way, normally closed (NC)
Work Media: air or inert gases
Mount: 180° Socket Connection
Voltage:24v
Power:1.3W
N371-C4XB10mm 3/2NC
Valve position: 2-position 2-way, normally closed (NC)
Work Media: air or inert gases
Mount: encapsulated cable(125mm) w/o connector
Voltage: 24v
Power: 1.3W
N371-C4XA110mm 3/2 NC
Valve position: 2-position 3-way, normally closed (NC)
Work Media: air or inert gases
Mount: direct wire(125mm)A1
Voltage: 24v
Power: 1.3W
N371-C4XA310mm 3/2NC
Valve position: 2-position 3-way, normally closed (NC)
Work Media: air or inert gases
Mount: encapsulated cable(125mm) W/connector-A3
Voltage: 24v
Power: 1.3W
N371-C4XA410mm 3/2 NC
Valve position: Two-position three-way, normally closed (NC)
Work Media: air or inert gases
Mount: encapsulated cable(125mm) W/connector-A4
Voltage: 24v
Power: 1.3W
N371-C4XA510mm 3/2 NC
Valve position: 2-position 3-way, normally closed (NC)
Work Media: air or inert gases
Mount: direct wire(125mm)A5
Voltage: 24v
Power: 1.3W
N371-C4XA610mm 3/2 NC
Valve position: 2-position3-way, normally closed (NC)
Work Media: air or inert gases
Mount: encapsulated cable(125mm) W/connector-A6
Voltage: 24v
Power: 1.3W
N371-C4XA710mm 3/2 NC
Valve position: 2-position 3-way, normally closed (NC)
Work Media: air or inert gases
Mount: encapsulated cable(125mm) W/connector-A7
Voltage: 24v
Power: 1.3W
N371-C2XA810mm 3/2 NC
Valve position: 2-position 3-way, normally closed (NC)
Work Media: air or inert gases
Mount: direct wire(125mm)A8
Voltage: 24v
Power: 1.3W
N371-C4XA9-B10mm 3/2 NC
Valve position: 2-position 3-way, normally closed (NC)
Work Media: air or inert gases
Mount: encapsulated cable(125mm) W/connector-A9
Voltage: 24v
Power: 1.3W
N371-C4ZP-F10mm 3/2 NC
Valve position: 2-position 3-way, normally closed (NC)
Work Media: air or inert gases
Mount: 90° Direct Socket
Voltage:24v
Power:1.3W
N371-04SP-FN371-04SP-F 10mm 3/2 NO
Valve position: 2-position 3-way, normally open (NO)
Work Media: air or inert gases
Mount: 180° Direct Socket
Voltage:24v
Power:1.3W
N371-04XA-F10mm 3/2 NO
Valve position: 2-position 3-way, normally open (NO)
Work Media: air or inert gases
Mount: encapsulated cable (125mm)
Voltage: 24v
Power: 1.3W
N371-C4XA7-D10mm 3/2 NC
Valve position: 2-position 3-way, normally closed (NC)
Work Media: air or inert gases
Mount: encapsulated wire(125mm)A7(26.7mm)
Voltage: 24v
Power: 1.3W
N371-C4ZP-A10mm 3/2 NO
Valve position: 2-position 3-way, normally open (NO)
Work Media: air or inert gases
Mount: 90° Direct Socket
Voltage:24v
Power:1.3W
N372 Series Direct Acting Solenoid Valve
Two-position two-way, two-position three-way, normally closed (NC) or normally open (NO) can be used in vacuum (-100kpa).
The 0.75W high-flow type can replace the operation of the 371 series vales to control the single-acting cylinder. The 0.4W type is used as the pilot valve of air pilot valve series
N372-C4ZPValve position: Two-position three-way, normally closed (NC)
Work Media: air or inert gases
Mount: 90° Direct Socket
Voltage:24v
Power:0.75W
N372-C4SP-FLValve position: Two-position three-way, normally closed (NC)
Work Media: air or inert gases
Mount: 180° Direct Socket
Voltage:24v
Power:0.4W
N372-04ZP-FLValve position: Two-position three-way, normally open (NO)
Work Media: air or inert gases
Mount: 90° Direct Socket
Voltage:24v
Power:0.4W
N372-C4XAValve position: Two-position three-way, normally closed (NC)
Work Media: air or inert gases
Mount: direct wire(125mm)
Voltage: 24v
Power: 0.75W
N372-04SP-FValve position: Two-position three-way, normally open (NO)
Work Media: air or inert gases
Mount: 180° Direct Socket
Voltage:24v
Power:0.75W
N373 Series Direction Acting Solenoid Valve 10mm
2/2, 3/2 Normally Close(NC); Connected in the manifold or single seat use. Two-position three-way type can control the operation of single-acting cylinder with high frequency; the 0.3w type miniature solenoid valve are low in power consumption, less in heat emission , used for knitting machine parts replacement, automation, scientific fields etc.
N373-C4LJValve position: Two-position three-way, normally open (NO)
Work Media: air or inert gases
Mount: Pin Socket(Left)
Voltage: 24v
Power: 0.3W
N373-C4MJValve position: Two-position three-way, normally closed (NC)
Work Media: air or inert gases
Mount: Pin Socket(middle)
Voltage: 24v
Power: 0.3W
N373-C4M-HValve position: Two-position three-way, normally closed (NC)
Work Media: air or inert gases
Mount: Pin Socket(middle)
Voltage: 24v
Power: 1W
N373-C4XJAValve position: Two-position three-way, normally closed (NC)
Work Media: air or inert gases
Mount: Direct Wire(125mm)
Voltage: 24v
Power: 0.3W
N373-C4XA-LValve position: Two-position three-way, normally closed (NC)
Work Media: air or inert gases
Mount: Direct Wire(125mm)
Voltage: 24v
Power: 0.75W
N373-C4SP-HValve position: Two-position three-way, normally closed (NC)
Work Media: air or inert gases
Mount: 90° Direct Socket
Voltage: 24v
Power: 1W
N375 Direct Acting Miniature Vlave 10MM
2-way 2-position small electric pneumatic solenoid valve, mounted with manifold or directly installed with single seat. Offer perfect performances with large flow ventilation with two-way on-off function. Various dimensions for meeting different industry applications. 10mm solenolid G1900543, D4840841 G2900631 G2900630 pin left
Valve position: Two-position three-way, normally closed (NC)
Work Media: air or inert gases
Mount: Pin Socket(middle)
Voltage: 24v
Power: 0.5W
Type: energy-saving( P→A)
N375(2.0)-2XJA-FValve position: Two-position three-way, normally closed (NC)
Work Media: air or inert gases
Mount: Direct wire(125mm)
Voltage: 12v
Power: 0.5W
Type: energy-saving( A→P)
N375(0.8)-2SP-HValve position: Two-position three-way
Work Media: air or inert gases
Mount: 180° degree socket
Voltage: 12v
Power: 1W
Type: energy-saving( P→A)
N375(0.8)-4ZP-HValve position: Two-position three-way
Work Media: air or inert gases
Mount: 180° degree socket
Voltage: 24v
Power: 1W
Type: energy-saving( P→A)
N375-4XA-HFValve position: Two-position three-way
Work Media: air or inert gases
Mount: Direct wire(125mm)
Voltage: 24v
Power: 1W
Type: energy-saving( A→P)
N376 Series Direct Acting 100mm Solenoid Valve
Two-position two-way, Two position three-way; Normally Close(NC); suitable for confined space installation, can be used to control single acting cylinder or to be used as pilot valve; widely used in life scientific devices, automation assembly and high speed manufacturing lines.
N376-4ZPValve position: Two-position two-way
Work Media: air or inert gases
Mount: pin socket(middle)
Voltage: 24v
Power: 0.5W
N376-4SPValve position: Two-position two-way
Work Media: air or inert gases
Mount: direct wire(125mm)
Voltage: 12v
Power: 0.5W
N376-4XA-LValve position: Two-position two-way
Work Media: air or inert gases
Mount: direct wire(125mm)
Voltage: 12v
Power: 1W
N376-4XJA-HValve position: Two-position two-way
Work Media: air or inert gases
Mount: direct wire(125mm)
Voltage: 12v
Power: 1W
N377 10mm Solenoid Valve High Frequency
Two-position two-way, two-position three-way, normally closed (NC), vacuum capable (-100kpa), specifically designed and developed to meet the needs of knitting machines with limited installation space; for customers who require an integrated and embedded installation in special fields. Special instructions must be followed for any vacuum use.
2/3 NC Solenoid Valve 10mm
Valve position: Two-position two-way
Work Media: air or inert gases
Mount: DIN socket connector
Voltage: DC24v
Power: 0.75W
N378 Series Two Position Three Way Direct Acting Miniature Valve
Two-position two-way, two-position three-way, normally closed (NC)
A perfect alternatives to the branded miniature solenoid with same quality yet cost-effective prices.
N378-C4XA-LValve position: Two-position three-way
Normally Closed (NO)
Work Media: air or inert gases
Mount: Direct wire(125mm)
Voltage: 24v
Power: 1W
N378-C4SP-LValve position: Two-position three-way
Normally Closed (NC)
Work Media: air or inert gases
Mount: 180° Direct Socket
Voltage: 24v
Power: 1W
N378-C4ZPValve position: Two-position three-way
Normally Closed (NC)
Work Media: air or inert gases
Mount: 90° Direct Pin Socket
Voltage: 24v
Power: 0.75W
All types of Plugs for 10mm Solenoid Valves
10mm Solenoid Valve Manufacture Vendor for Your Industry Automation
Supplying Miniature Pneumatic Solenoid Valves for Knitting Machines
Solenoid valves are widely used in fluidic systems to control the flow of fluids.
By using solenoid actuation, these valves can be conveniently controlled by simple electrical switches, even in remote locations.
Solenoid valves offer fast and reliable switching, long service life, high reliability, low control power and a compact design, making them the ideal choice for many flow(air or liquid) precise control applications.
HEIGHTRONICS offers 10mm miniature solenoid valves in many designs and different powers, so as to fit the installations where limited space and high frequency working are required.
Below electrovalves are with 10mm width with different power consumption, are used a lot on different branded sock, hoisery or pantyhose machine in different country market.
These 10mm solenoid valves are available in stock with quick delivery at your request:
D4840841
D4840745
D4840714
D4840090
D4848140
D4840090 & D4840714
G1920940
G1900123/G1900543
G1840207
G2900836
U8840008
180-1604-00-9 electrovalve L-2-10mm
180-1605-00-9 electrovalve S-2-10 mm
Since the first hand-cranked knitting machine was invented by the English in 1589, knitting machine technology has evolved dramatically over the past few hundred years.
Nowadays, knitting machines such as circular knitting machines, high-speed hosiery machines, seamless underwear machines, warp knitting machines, weft knitting machines, etc. are able to produce not only complex and varied patterns, but also, and more importantly, to increase the speed of knitting machines.
One of the crucial components for speed control is the SOLENOID VALVE.
Because of the more advanced and compact design of today’s knitting machines, the 10MM SOLENOID VALVE is small in size, generates little heat and has significant energy-saving features.
These pneumatic solenoid valves are widely used by major brands of knitting weaving machines for installation.
Based on the large user base, a large number of sock manufacturers and knitted fabric manufacturers need small solenoid valve replacement on the old machine every year in order to maintain the high efficiency of the factory
HEIGHTRONICS offers both 10mm solenoid valves and 15mm solenoid valves. These mini solenoid pneumatic solenoid valves for suitable socks machines, hosiery machines, jaquard knitting machines,etc.
You can find:
1.3w 10mm solenoid valves
o.75w 10mm high flow solenoid valve
0.45w 10mm high efficiency solenoid valve
1w 10mm mini solenoid valve on customiation asis
DC6V DC112V DC24V 10MM Solenoid valve
AC110V AC220V 10mm Solenoid Valve
If you have special requirement on the miniature high frequency solenoid vales, contact us freely.
LONATI socks knitting machines
SANTONI seamless wears knitting machines
Sangiacomo sock knitting machines
Sangiacomo double cylinder sock knitting machines
Sangiacomo single cylinder hosiery
Sangiacomo pantyhose machines.
Ange 12.3 Sock Knitting Machines
Conti Florentia Circular knitting machine
Conti socks knitting machine
COLOSIO socks knitting machine
DAKONG circular knitting machines
Karl mayer knitting machine replacment parts
LIBA raschel bag knitting machine
and more brands like MATEC, COMEZ, SOOSAN, COLOSIO, DAH HEER, NAGATA, DAKONG, KYANG YHE, CONTI COMPLETT, PICANOL, TSUDAKOMA, DORNIER, SOMET, VAMATEX, TOYOTA, SULZER, GRACO.
Our 10mm solenoid valve can replace SMC, PNEUMAX, FIM, METALWORK, FAS. etc branded electrovalves. HEIGHTRONIC miniature pneumatic solenoid valves have beedbeen market validated for over 15 years in over 15 countries. Stable in quality and half price compared to Japan, European brands same competitive pneumatic valve items.